Current

DOE-HDBK-1122-2009 Chg Notice 2, Radiological Control Technician Training (Part 9 of 9)

Functional areas: Radiation Control Technician, Facility Practical Training, Radiation Control, Radiation Protection, Training

This Handbook describes an implementation process for core training as recommended in chapter 14 to Implementation Guide G441.1-1C , Radiation Protection Programs for Use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection, and as outlined in the DOE standard, Radiological Control (RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing core training recommended by the RCS
DOE-HDBK-1122-2009_part9.pdf114.02KB
Version history and related documents
Document text

Text extracted from the attached file. Refer to the original document for the authoritative version.

Section 1

Part 9 of 9 Radiological Control Technician Training Facility Practical Training Attachment Phase IV Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 This page intentionally left blank ii DOE-HDBK-1122-2009 Table of Contents Page Introduction................................................................................................................................1 Facility Job Performance Measures ........................................................................................2 Final Verification Signatures ....................................................................................................3 iii DOE-HDBK-1122-2009 This page intentionally left blank. iv DOE-HDBK-1122-2009 Introduction Phase IV: Facility Practical Training At DOE sites with more than one facility, and where RCT tasks at each facility may differ, site and facility tasks should be separated. The tasks that are common to all the facilities on the site should be included in Phase II training with the core tasks. Tasks unique to a facility should be added to the training program qualification standard, as an attachment, as Phase IV training. Not all the DOE sites will include Phase IV training in their programs. Phase IV training allows each site to qualify technicians to a select facility. Since the core training for the technicians is standardized, the transfer of technicians between facilities, within a DOE site, requires that only facility tasks be taught, provided the core qualification is current. Facility Job Performance Measures Next 1 DOE-HDBK-1122-2009 Facility Job Performance Measures ACKNOWLEDGMENT OF SUCCESSFUL COMPLETION OF FACILITY JOB PERFORMANCE MEASURES: JOB PERFORMANCE MEASURE TRAINER/ EVALUATOR SIGNATURE DATE STUDENT SIGNATURE DATE QUALIFICATION AREA: QUALIFICATION AREA: QUALIFICATION AREA: Final Verification Signatures Next 2 ___________________________________________________ _________________ ____________________________________________________ _________________ DOE-HDBK-1122-2009 Final Verification Signatures I have verified that I have completed the above documented facility practical training requirements. Student RCT Date I have verified that the facility practical training requirements for the above named individual are satisfactorily completed and am assured that the individual is capable of safely performing all the listed functions of a Radiological Control Technician at ________________________________ (facility). Radiological Control Manager or designee Date 3 DOE-HDBK-1122-2009 This page intentionally left blank 4 DOE-HDBK-1122-2009 CONCLUDING MATERIAL Review Activities: Preparing Activity: DOE Ops Offices DOE HS-11 DP AL HSS CH EM ID Project Number: ER NV FM OR TRNG-0053 LM RL NE SR NS PR SA National Laboratories BNL LANL LLNL PNNL Sandia FNL SRNL Area Offices Amarillo Ashtabula Carlsbad Columbus Fernald Kansas City Kirtland Los Alamos Pinellas 5 DOE-HDBK-1122-2009 This page intentionally left blank. 6

Something wrong with this record? Tell us